|
...ASTM Invar 36 /W. Nr 1.3912 Precision Alloy Bar/Rod Invar 36 is a nickel-iron,low expansion,alloy containing 36% nickel.It maintains nearly constant dimensions over the range of normal atmospheric temperatures,and has a low coefficient of expansion from cryogenic temperatures of about 500.The alloy also retains good strength and thoughness at cryogenic temperatures. Invar 36...
Verified Supplier
|
|
ASTM A709Grade 36(A709GR36) Carbon and Low-alloy High-strength Steel Plate Chemical Composition and Mechanical Property Grade Chemical composition % A709GR36 C Si Mn P S Cu ≤0.26 ≤0.40 - ≤0.04 ≤0.05 ≤0.20 Mechanical properties Yield Strength Mpa Tensile Strength Mpa Elongation in 2 in. % ≧250 400-550 ≧23 Application ASTM A709Grade 36...
Active Member
|
|
...ASTM A 36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. It is widely used in the construction of buildings, bridges and other structures by means of welding, bolting or riveting. This steel is useful because of its wide availability. ASTM A 283 ASTM...
Verified Supplier
|
|
...ASTM F1684 Invar 36 Bars Equivalent Grades Alloy DN-Trade Name WERKSTOFF NR. UNS-No. ASTM Specification DIN Specification Ni 36* Dilaton 36 1.3912 K93603 ASTM F1684 DIN 17745 / SEW 385 NAS 36 UNS K93600 Rod and Bars Chemical Composition Grade C Mn P S Si Ni Cr Fe W Co Invar 36 .15 max .60 max .006 max .004 max .40 max 36...
Verified Supplier
|
|
...ASTM A516 length 4880mm thk 2~50mm Steel is commonly considered carbon steel when no minimum content is specified for any alloying element (for example, aluminum, chromium, nickel, molybdenum, vanadium, etc.) or any other element added to obtain a desired alloy effect. The manganese does not exceed 1.65%, the specified minimum for copper in not below .40% or exceed .60% and silicon does not exceed .60%. Alro stocks ASTM A-36
Verified Supplier
|
Recommended Quality Verified Suppliers